• Another function of the range is to provide an easy energy efficient step edge illumination and safety solution.
• In the event of a power failure, whether emergency or local, which occurs on the stairways and escalates the risk of hazard to evacuees, the system enables the evacuee to orientate, locate stair edges and risers, and to assist in the safe evacuation of the premises. T.
• There is no requirement for an electrical connection. Also, the facility is easy to install. Moreover, it needs no unique maintenance other than the one that must be done usually on a similar product.
• Its operation is activated with normal illumination which can be daylight, fluorescent or standard tungsten filaments.
• The hard wearing silicon carbide that is slip resistant can be used externally. It is suitable for commercial and domestic applications where public safety is a priority.
• The wide variety can be used on a range of substrates including concrete, timber, tiles, vinyl, steel and checker plate the inserts are available in a wide range of colours promoting visibility whilst blending in with the environment.

Establishment.

• The steps should be clean, dry, free of debris and level.
• If already drilled, use the holes to mark steps for where to drill.
• Drill and Plug the steps.
• Use the correct glue to the bottom of the nosing and apply nosing to the step.
• Tighten the step using properly sized screws to hold it in place.
• Use an insert or insert pip to cover the screw head.

Note: Be mindful that this type of profile (from the factory) already comes with holes.