FEATURES & Benefits:

• Creates a pleasing decorative finish of the steps.
• Enhances mechanical damage protection along edges.
• When using the stairs, one can be assured that they won’t slip or fall. This is because of the corrugated part of the slats.
• The special shape of the grooves makes them easy to clean.
• There are a lot more grooves than other market products.
• It has no toxic substances for humans and animals.
• Colors are available in a wide range.
• Malleable, stretchy, 3D-object that won’t lose its shape.
• Simple to assemble (No care needed).
• Composed of a unique blend of PVC.

Information:

• PVC bull nosing provides a hard wearing safety measure for domestic or commercial indoor stairs. 
• A high quality profile for stairs and communication runs. For treads finished “straight. A fused photoluminescent element positioned on the edge of the profile shining in the dark (the duration of illumination depends on the time and intensity of the illumination).
• The installation needs to be kept at room temperature – Clean and align the surface of the stairs – Trim to the exact width of the step with a knife – put assembly glue or double-sided tape! Do not stick the bottom part to the step! Firmly press and wait for the glue to dry.
• Stair tread guards are packed very well so as not to get bent or twisted at all.
• Every trim is supplied in the manufacturer’s packing with the right screws and plugs for installation.
• The Bullnose stair anti-slip nosing has a 1.18 Meters (46.45″) length and a rubber angle that is high-quality. 
• The PVC stair nosing or bull nosing is ideal for a durable safety measure for indoor steps.
• You can stick the anti-slip corner protector with contact adhesive and it will prevent slipping of feet plus protect the stair corners.

Installation:

• Installation should occur at room temperature. When temperatures are low, the profile must be heated before assembly, using warm air or warm water.
• Smoothing out of the surface of the stairs.
• Using a knife or shears, cut the profile to the exact step width.
• Follow the instructions provided by the adhesive manufacturer for applying assembly glue; otherwise, take a piece of glue tape and stick it ONLY on the entire upper part surface of the profile (not to the step on the lower part).
• Apply pressure to the step and let the adhesive dry.